HIGH QUALITY GRAPHENE ON PMMA

New

Single layer of graphene grown on copper, the graphene grows on both sides of the copper foil. This is a very homogeneous and high quality product.

More details

149,74 €

Add to wishlist

More info

Single layer of graphene grown on copper, the graphene grows on both sides of the copper foil. This is a very homogeneous and high quality product. It is widely used in R&D departments and laboratories due to its quality and ability to be transferred to other substrates.

  • High purity and high quality graphene, controlled by RAMAN spectroscopy
  • Coverage of nearly 95%
  • The graphene film is continuous, with occasional holes and craters
  • The graphene film is polycrystalline
  • Electronics and Optoelectronics
  • Lighting
  • Sanitary
  • Displays
Transparency > 97%
Coverage > 95%
Thickness (theoretical) 0.345 nm
Specific surface resistance 450±40 Ohms/sq (1cm x 1cm)
Grain size Up to 10 μm
FET Electron Mobility on Al2O3 2000 cm2/Vs
FET Electron Mobility on SiO2/Si 4000 cm2/Vs

Wear gloves and protective clothing. Avoid contact with eyes, skin and clothing. Prevent the accumulation of dust. Keep away from sources of ignition, heat and flames. Do not smoke in the handling area. It must be handled in a place with an extraction system. Avoid contact with strong oxidising agents. Make sure that the packaging is not damaged or broken. Perform loading and unloading of the product with care to avoid impacts and breakage. Store in sealed containers in a cool, dry, well-ventilated place and away from heat sources. The shelf life of the product is a minimum of 1 year if it is stored in the intact original packaging.